@!=1
!===== Parameter File created 10/31/2008=============================
! Parameter files are used with graphic displays to specify the tags a 
! display uses at runtime.  The parameter file is passed to the graphic 
! using the /P option of the Display command.
! Syntax:
!     #replacement=tagname
! Example:
!     #23=A_COLOR
! #23 in any expression in a graphic  would be replaced by the tag A_COLOR.
!============================================================
#1=HMI\Labels\CounterScale4
#2=HMI\Labels\CounterScale5
#3=HMI\Labels\CounterScale6
#4=HMI\Labels\CounterScale7
#5=HMI\Labels\CounterScale8
#6=HMI\Labels\CounterScale9
#7=HMI\Labels\CounterScale37
#8=HMI\Labels\CounterScale38
#9=HMI\Labels\CounterScale39
#10=HMI\Labels\CounterScale40
#11=[Logix]HMI_RecipeOffline.CounterAndScale.MECHWh1OpVac
#12=[Logix]HMI_RecipeOffline.CounterAndScale.MECHWh2Sec
#13=[Logix]HMI_RecipeOffline.CounterAndScale.MechWh3Sec
#14=[Logix]HMI_RecipeOffline.CounterAndScale.MECHWh2BrassValve
#15=[Logix]HMI_RecipeOffline.CounterAndScale.MECHWh3BrassValve
#16=[Logix]HMI_RecipeOffline.CounterAndScale.MECHWh2Wh3OpVac
#17=[Logix]HMI_RecipeOffline.CounterAndScale.MECHPkHoldDnPos
#18=[Logix]HMI_RecipeOffline.CounterAndScale.MECHFlapNonOpTop
#19=[Logix]HMI_RecipeOffline.CounterAndScale.MECHDownProdSens
#20=[Logix]HMI_RecipeOffline.CounterAndScale.MECHHopSideRail